VT Gutter Accessories
Manufactured Int. or Ext. Mitre
| Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suite the design of the building. |
Stop End
| Individual stop ends can be supplied in left and right hand ready for on site installation. |
GP Bracket
 | GP brackets are fixed at 1.2 metre intervals and are generally used when replacing existing gutters. |
Note: Component availability is State specific, please check prior to ordering.
VT Gutter
VT Gutter has a square front which is designed to hide the ends of roof sheets.
The square VT gutter profile is available in slotted form. Slots allow for water to overflow the gutter freely in areas of high rainfall.
VT Gutter Technical Information
Dimensions
Profile | Dimensions (mm) |
 | A | 73 |
| B | 125 |
| C | 120 |
Specifications
| Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Sect. Area (mm²) |
| G550 | 0.55 | Standard | 7874 | |
| Slotted | 6338 | 7583 |
Note: Calculation of effective cross sectional area ‘Capacity’ for each nominal size of eavesgutter is based on requirements of section 3.8 AS/NZS 2179.1:1994
