OG Gutter

90° External and Internal Cast Angle

Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.

90° Two Piece Cast Angle

Two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner.

135° Internal and External Cast Angle

Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building. (Not available in QLD).

135° Two Piece Cast Angle

Two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner. (Not available in QLD).

Internal and External Mitres

Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.

Return Stop End

Manufactured Return stop ends are made from a continuous length of gutter and supplied ready to install on site. The face of the gutter continues around the corner to the stop end portion of the gutter.

Stop End

Individual stop ends can be supplied in left and right hand ready for on site installation.

External Bracket

External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.

150mm Spike Bracket

Spike brackets are used on the more traditional Queensland homes. The spikes are fixed into the timber fascia, positioned underneath the gutter with the front portion of the bracket wrapping around the face of the gutter.

Internal Str-8-line Strap

Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external gutter face.

Timber Fix Clip

Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building.

Note: Availability is state specific, please check prior to ordering.