About this product
OG Gutter has a traditional, charismatic profile. OG stands for 'Old Gothic'. The style of OG Gutter makes it the ideal choice for use on both traditional and modern homes. It is available with slots and in a huge range of colours.Image gallery
Traditional Elegance
Guttering that exudes traditional charm and character.
Featuring elegant, ornate, flowing lines that exude traditional charisma. Stratco OG or ‘Old Gothic’ gutter imparts a classic style to both modern and period homes.
Available with slots in the front to allow water to overflow, Stratco OG Gutter can be ordered in un-painted zinc/al or in a huge range of pre-painted steel colours. Finish your project with a comprehensive range of OG Gutter accessories including mitres, stop ends and brackets.
Available Colours
Brochures & Installation Guides
Gutter Accessories
90° External and Internal Cast Angle
Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.
90° Two Piece Cast Angle
Two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner.
135° Internal and External Cast Angle
Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building. (Not available in QLD).
135° Two Piece Cast Angle
Two piece cast angles provide an easy and flexible solution to gutter mitres. The gutter is clamped into position instead of being riveted to allow for expansion and contraction of the gutter at the corner. (Not available in QLD).
Internal and External Mitres
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.
Return Stop End
Manufactured Return stop ends are made from a continuous length of gutter and supplied ready to install on site. The face of the gutter continues around the corner to the stop end portion of the gutter.
Stop End
Individual stop ends can be supplied in left and right hand ready for on site installation.
External Bracket
External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.
150mm Spike Bracket
Spike brackets are used on the more traditional Queensland homes. The spikes are fixed into the timber fascia, positioned underneath the gutter with the front portion of the bracket wrapping around the face of the gutter.
Internal Str-8-line Strap
Internal gutter straps hold the face of the gutter into position. They are installed internally at 1.2 metre intervals and are not visible on the external gutter face.
Timber Fix Clip
Timber fix clips are used on timber fascia, a simple solution for replacing existing gutter on a building.
Note: Availability is state specific, please check prior to ordering.
Specifications
| Specifications | |||||
| Size (mm) | Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Section Area (mm²) |
|---|---|---|---|---|---|
| 125 | G550 | 0.42 | Standard | 4432 | 5609 |
| Slotted | 3374 | 4432 | |||
| 125 Ribbed | G550 | 0.42 | Standard | 5500 | 6730 |
| Slotted | 4654 | 5506 | |||
| 150 | G550 | 0.42 | Slotted | 5763 | 7055 |
Note: Calculation of the effective cross sectional area ‘Capacity’ for each nominal gutter is based on the requirements of section 3.8 AS/NZS 2179.1:1994.
Dimensions
| Size (mm) | A | B | C |
| 125* | 56 | 125 | 97 |
|---|---|---|---|
| 125 Ribbed^ | 62 | 124 | 90 |
| 150† | 68 | 130 | 100 |
* Available in NSW ACT
^ Available in SA WA VIC AS
† Available in QLD
