About this product
The appealing shape of Half Round Gutter is largely self cleaning. It has a good water carrying ability due to its wide 150mm diameter. Half Round is ideal for modern homes and is also popular on commercial buildings because of its practical shape.Image gallery
Stylish and Practical Guttering
Traditional curved forms of Stratco Half Round Gutter
Stratco Half Round Gutter is the perfect compliment to Spanish, and Tuscan styled homes. However, it has been used to great effect on both modern and traditional architecture.
Its smooth, self-cleaning shape also lends its use to commercial and industrial buildings due to its practicality.
Available Colours
Brochures & Installation Guides
Gutter Accessories
90° External and Internal Cast Angle
Pre-made cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean and modern look around the corners of the building.
90° Two Piece Cast Angles
Available in NSW only, pre-made two piece cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean look around the corners of the building.
135° Two Piece Cast Angles
Pre-made two piece cast internal and external corners provide an easy solution to gutter mitres. They are neat, practical and aesthetically pleasing, providing a clean look around the corners of the building.
Internal and External Mitres
Gutter mitres manufactured from the same gutter profile can be supplied, ready to use on site. These mitres provide a continuous line around the corners and can be made to any angle required to suit the design of the building.
Return Stop End
Return stop ends are ready to be installed on site to suit project requirements.
Stop End
Individual stop ends can be supplied in left and right hand ready for on site installation.
Cast External Bracket
External gutter brackets are fixed on to the fascia at 1.2 metre intervals using a string line. They provide a more traditional look and are visible on the external face of the gutter.
Note: Availability is state specific, please check prior to ordering.
Specifications
| Specifications | ||||
| Tensile (MPa) | BMT (mm) | Type | Capacity (mm²) | Total Cross Section Area (mm²) |
|---|---|---|---|---|
| G550 | 0.42 | Standard | 7703 | 9176 |
| Slotted | 7126 | 8597 | ||
Note: Calculation of the effective cross sectional area ‘Capacity’ is based on the requirements of section 3.8 AS/NZS 2179.1:1994.
Dimensions
|
Dimensions (mm)
|
|
| A | 78 |
|---|---|
| B | 148 |
| C | 104 |
